truck - radiator tanks and parts - Solder on Tank Sets - volvo

Top Tank This tank has a 2.50" diameter hose connection, and a 1/4" NPT flange to accommodate a hose barb for venting. Bottom Tank This tank has a 2.50" diameter hose connection slanting at an angle towards the ground, a 1/4" NPT extended flange for a drain cock, two holes @ 10.00" centers to accommodate an oil cooler, and four mounting bosses to accommodate 5/16" bolts. Kit comes with a 1/4" NPT drain cock, a 1/4" NPT 90 degree elbow, and a 1/4" NPT x 3/8" hose barb. Note: this kit matches brass kit #VG 9303.

Top Tank This tank has a 2.50" Hose connection (angled upward), a 1/4" NPT flange for an expansion tube, two 5/16" mounting holes to attach side frames, three 5/16" NC threaded blocks to mount the surge tank, and four 1/4" threaded blocks to attach the rubber seal. Bottom Tank This tank is the same as the top except the hose connection is at the other end, the flange is for a drain cock, and there are holes @ 11.50" centers to accommodate an oil cooler (to be supplied and installed by the customer). Note: this kit comes with complete with four mounting bolts with washers and nuts, a hose barb, and a drain cock.

Top Tank This tank has a 2.50" diameter hose connection, a pair of mounting bosses at each end to attach side frames, four 1/4" NC threaded blocks on the top, four 1/4" NC threaded blocks on the grill side, and a 1/4" NPT flange for an expansion barb. Bottom Tank This tank has a 2.50" diameter hose connection, a pair of mounting bosses at each end to attach side frames, four 1/4" NC threaded blocks on the grill side, a 22mm flange for a quick fill line, and two holes @ 11.50" centers to accommodate an oil cooler.

Both hose connection 2.50"; top tank hose connection 9.00" from end of tank to center of connection; bottom connection 11.50" from end of tank to center of connection