truck - radiators - all
20.06" x 18.37" x 1.87"
Inlet: 1.50" Top Left
Outlet: 1.50" Bottom Right
Isuzu Radiator
24.37" x 23.50" x 1.50"
Inlet: 1.50" Top Left
Outlet: 1.50" Bottom Left
Isuzu Radiator
Fits 2004 - 2005 NPR, NQR, NRR, and W Series
Oil Cooler on Grill Side
40.00" x 28.62" x 2.62"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Left
Kenworth T600A, T800, T400B, T450B
32.75"x 28.50" x 2.62"
Inlet: Check Valve
Outlet: 1.00" Bottom Left
Low Flow Radiator- Baffle runs the length of bottom tank
Low Flow Radiator T450 Series Kenworth, T400A
*Takes 9566R4LFSHORT Core*
40.00" x 28.62" x 2.62"
Inlet: Check Valve
Outlet: 1.00" Bottom Left
Low Flow Radiator
Bottom Tank has a Baffle
Low Flow Radiator
Kenworth T450 Series, T400A
*Takes 9566R4LF Core*
39.25" x 29.00" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
Kenworth Radiator
Fits 1989 - 1993 T400B/T450B/T600/T800 with CAT 3406B ATTAAC Engine
*Not available in bolt-on, Solder structure only*
40.00" x 28.62" x 2.81"
Inlet : 2.50" Top Right
Outlet : Flange
Kenworth Radiator
31.50" x 27.43" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
Kenworth Radiator
Fits T400B/T450B/T600/T800
*Available only in Solder On Tanks*
40.00" x 28.62" x 2.625"
Inlet : 2.50" Top Left
Outlet : Flanged
14 Fins Per Inch
*4 Row CT Core # 9566R4 with 1/2" Tubes on 17/32" Centers*
Kenworth Complete Radiator
38.00" x 34.12" x 2.00"
Inlet: 2.50" Upper Left
Outlet: 2.50" Lower Right
Reuse OEM Frame*Replacement brass tanks require additional vibration stripping reinforcement*
Kenworth1997-2007 Kenworth T2000
Replaces the original unit that was all aluminum.
35.00" x 41.25" x 3.43"
52 Bolt Holes
Kenworth Complete Radiator
40.00" x 28.62" x 2.62"
Inlet: 2.25" Top Right
Outlet: Flanged
Kenworth Radiator
35 X 39.94
Inlets 3"
Outlet 3.50"
40.00" x 30.00" x 3.00"
Inlet: 2.25" Top Right
Outlet: 3.00" Bottom Right
Kenworth Radiator
1988 - 1994 T/W Series
40.00" x 29.81" x 3.56"
Inlet: 2.50" Top Left
Outlet: 3.00" Bottom Right
Kenworth Radiator
Fits 1992 - 1995 early T600 Model
40.00" x 28.75" x 2.62
"Inlet: 2.25" Top Left
Outlet: Flange
1986 - 1991 Off Road Kenworth C550
32.68" x 28.75" x 2.62"
Inlet: 2.50" Top Left
Outlet: Flange
1993 - 1995 Kenworth T450
*MUST VERIFY LOCATION OF CAC MOUNTS* IF CAC MOUNT IS NEAR BOTTOM TANK SEE PART KW5605A
32.68" x 28.75" x 2.62"
Inlet: 2.50" Top Left
Outlet: Flange
1993 - 1995 T450
Different Side Channels than KW5605
*USE TOP TANK #KW5992*
40.00" x 28.62" x 3.00"
Inlet - 2.50"
Outlet - 4 Bolt Flange
Kenworth Radiator
W900B, W900L with a Cat 3406 Engine, 1990
35.00" x 41.25" x 3.43"
52 Bolt Hole Pattern
12 Fins Per Inch
6 Row FF Style Core with 1/2" Tubes on 5/8" Centers
Core# 9479R6N
Header Dimensions - 5859 bolt pattern (7.25 x 43.625 with 52 bolts)
35.00" x 41.25" x 2.62"
Inlet: 2.50" Top Left
Outlet: 3.00" Bottom Right
52 Bolt Holes
*4 Row CT Core with 1/2" tubes on 5/8" centers*
Kenworth Radiator
Fits T800/T900 with High Hood
35.00" x 41.25" x 2.62"
Inlet: 2.50" Top Left
Outlet: 3.00" Bottom Right
52 Bolt Holes
*4 Row Flat Fin Core- 1/2" tubes on 5/8 centers*
Kenworth Radiator
Fits T800 with High Hood and W900 Series
Takes Core Number 5859R4N
*Customer may have to reuse bottom bracket*
35.00" x 41.25" x 2.62"
Inlet: 2.50" Top Left
Outlet: 3.00" Bottom Right
52 Bolt Holes
*4 Row CT Core with 1/2" tubes on 5/8" centers*
Similar to the KW5859 Inlet comes up at an angle.
35.00" x41.25" x 2.62"
Inlet: Top Left
Outlet: 3.00" Bottom Right
52 Bolt Holes
*4 Row CT Core with 1/2" Tubes on 5/8" Centers*
Kenworth Radiator
*Same as our part number KW5859 except the top tank and bottom bracket*
35.00" x 41.176" x 2.62"
Inlet: 2.50" Top Left
Outlet: 3.00" Bottom Right
52 Bolt Holes
Kenworth Radiator
*Custom Built Bottom Bracket*
38.00" x 33.25" x 2.00"
Inlet: 2.50" Upper Left
Outlet: 2.50" Lower Right
1997-2007 Kenworth T2000
Use KW52 without Frame
*Repalces Original Brass/Copper Application*
Use the KW8061 when Radiator is mounted in outer frame with rubber grommets. Use KW6010 when Radiator is mounted in inner frame and then mounted in outer frame.
36.93" x 39.43" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
NO WARRANTY
Superseded to Part# PB69BO
25.68" x 39.43" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
2011-2013 Kenworth T300
2011-2014 Peterbilt 330, 337-348 Models
43.00" x 31.31" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
2011-2013 Kenworth T660
22.18" x 39.43" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
2008-2011 Kenworth T300
2008-2011 Peterbilt 330
2008-2010 Peterbilt 335 & 340 Models
44.12" x 41.06" x 2.00"
Inlet: 2.50" Top Right
Outlet: 2.50" Bottom Left
2009-2015 Kenworth C500
45.75" x 32.75" x 2.62"
Inlet: 2.50" Upper Left
Outlet: 2.50" Lower Right
1999-2007 Kenworth T800W Cross-Flow
Core# 9573R4
34.62" x 15.75" x 2.00"
Inlet: 2.25" Upper Left
Outlet: 2.25" Lower Right
2004-2007 Kenworth T300
2004-2007 Peterbilt 330 & 335
2007 Peterbilt 340
*Please use PB7705*
38.00" x 34.12" x 2.00"
Inlet: 2.50" Upper Left
Outlet: 2.50" Lower Right
**Superceded to DRC Part KW8061BO**
1997-2007 Kenworth T2000
38.00" x 34.12" x 2.00"
Inlet: 2.50" Upper Left
Outlet: 2.50" Lower Right
1997-2007 Kenworth T2000
37.75" x 24.00" x 2.00"
Inlet: 2.50" Upper Left
Outlet: 2.50" Upper Right
Kenworth Radiator
40.50" x 31.37" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
2008-2011 Kenworth T660
2008-2014 Kenworth W900
40.50" x 31.37" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
2008-2011 Kenworth T660
2008-2014 Kenworth W900
With Framework
40.00" x 28.00" x 2.62"
Inlet: 2.50" Top Left
Outlet: Flange
Kenworth Radiator
40.50" x 30.62" x 2.00"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
2008-2014 Peterbilt 320
With PTO
40.50" x 30.62" x 2.81"
Inlet: 2.50" Top Left
Outlet: 2.50" Bottom Right
Flat Fin Style
2008-2014 Peterbilt 320With PTO
38.75" x 27.50" x 2.37"
Inlet: 2.31" Top Right
Outlet: 2.50" Bottom Right
2007-2014 Mack LEU Series
**Note location of crankbox, 7300-41 slightly different. Please note small connection in left side of bottom tank**
38.75" x 27.50" x 2.00"
Inlet: 2.31" Top Right
Outlet: 2.50" Bottom Right
**Takes Core Part Number AL2420**
Mack Radiator
Fits 2007 - 2010 MRU Sanitation Truck with 6" Round PTO
38.75" x 27.50" x 2.00"
Inlet: 2.31" Top Right
Outlet: 2.50" Bottom Right
**Takes Core Part Number AL2420**
2007-2014 Mack LEU Series
38.75" x 27.50" x 2.25"
Inlet: 2.31" Top Right
Outlet: 2.50" Bottom Right
**Takes Core Part Number AL2420**
Mack Radiator
Mack MRU with PTO
Ref: 3MF5595M2 has oil cooler
Ref: 3MF5582M2 no oil cooler
Ref: 1003694 no oil cooler
Ref: 1003693 has oil cooler
Ref: 21098669 crossed to with & without oil cooler
38.75" x 27.50" x 2.00"
Inlet: 2.31" Top Right
Outlet: 2.50" Bottom Right
**Takes Core Part Number AL2420**
2007-2014 Mack MRU Seriescooler
43.25" x 30.62" x 2.37"
Inlet : 2.00" Top Left
Outlet : 2.50" Bottom Left
Mack Radiator
Fits 1985 - 1993 R Model Mack
Includes brackets
Core # 6983
37.25" x 30.69" x 2.00"
Inlet : 2.00" Top Left
Outlet : 2.50" Bottom Left
Mack Radiator
Fits 1985 - 1993 R Model Mack
29.00" x 34.37" x 2.37"
Inlet : 2.00" Top Left
Outlet : 2.50" Bottom Left
Mack Radiator
Fits 1985 - 1993 RD Model Mack
With mounting pad and brackets
